Ask Experts Questions for FREE Help !
Ask
    cheef7777's Avatar
    cheef7777 Posts: 2, Reputation: 1
    New Member
     
    #1

    Mar 27, 2010, 12:58 PM
    Furnace runs no flame
    Furnace constantly runs doesn't ever turn off, cold air blows from vents
    tickle's Avatar
    tickle Posts: 23,796, Reputation: 2674
    Expert
     
    #2

    Mar 27, 2010, 01:19 PM

    Well that's a no brainer if it is a gas furnace, cheef. That means you have gas coming into the house and the pilot light is off in your furnace. Can you smell gas yet ?

    Tick
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
     
    #3

    Mar 27, 2010, 01:36 PM

    Look at the bottom door for a flashing light. This may tell you what is wrong with it. Does it vent with metal or plastic pipe?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace runs no flame [ 2 Answers ]

Furnace constantly runs no flame

Furnace goes through normal start-up. Induced runs, Flame comes on, but no main blower [ 2 Answers ]

I have a nordyne furnace running on propane. It is about 15 months old. Furnace goes through normal start-up. Inducer fan runs, approximately 30 seconds later the flame comes on, main blower never comes on. Flame turns off. About 30 secs after flame is off, main blower comes on and stays on...

Beckett burner starts has flame for about 15 seconds off for 12 then flame on & runs [ 7 Answers ]

I have replaced the following with the problem still happening: replaced the primary control(R8184G 4009), cad cell--the oil unit was service at the beginning of the heating season. Ran like a champ. Now for the past two weeks with new parts the problem is: Oil burner starts with a flame for...

Furnace blower will not stop after flame goes out on gas furnace [ 1 Answers ]

Furnace blower will not stop after flame goes out on a gas furnace

Rudd heater runs the flame will not stay on to heat [ 1 Answers ]

I Have a Rudd Heater it has a electronic ignighter it comes on lights the flame, but the flame will not stay on, the heater runs but the flame comes and goes, it will not stay on and heat the house


View more questions Search