My whirlpool gold gsx9885jqo washer will not spin

Check out some similar questions!

Whirlpool washer, agitator works, but during the spin cycle it doesn't spin [ 1 Answers ]

I have a whirlpool washer, I replaced the outer tub and the drive block, but it now doesn't spin. It drains the water, I can hear the motor come on, and feel the vibration . The switch is fine. I looked at the couple, but did not take it apart. The clutch looked fine, sanded the pads and case....

Myt Whirlpool Gold will not spin [ 2 Answers ]

Hello all, We have a whirlpool gold catalist mod: GSX9885JQO and it will NOT spin. It will go through a complete cycle without any error codes. It just won't spin. HELP.

Whirlpool gold washer [ 1 Answers ]

If you have a Whirlpool gold washer(and some others for that matter)that won't go into spin cycle,there is a very good chance the problem is with the lid switch.On my Whirpool gold washer the lid switch separated slightly and I was able to to use two zip ties to hold it together.This fix may or may...

Whirlpool gold w/ catalyst model gsx9885jqo OFF balance sign [ 1 Answers ]

Hello, My Whirlpool Gold w/ Catalyst Model # gsx9885jqo Is and has been Displaying The OL(off balance) sign. I don't know what is wrong and this washer was very expensive. It happens to be going out of balance every load on the spin Cycle & I will lift it up and set the lid back down & it will...

Whirlpool Gold gsq9364hqo doesn't always spin on the spin cycle. [ 2 Answers ]

Whirlpool Gold gsq9364hqo doesn't always spin on the spin cycle. The motor runs but the basket doesn't spin. If I lift the lid the motor stops, then something (clutch or pawl?) catches and if I put the lid back down than it starts spinning correctly every time. Any ideas?

View more questions Search

Check out some similar questions!

Add your answer here.