Ask Experts Questions for FREE Help !
Ask
    Mark 37's Avatar
    Mark 37 Posts: 7, Reputation: 1
    New Member
     
    #1

    Mar 18, 2010, 05:45 AM
    Ceiling fan repair
    3-speed fan suddenly would only run on high speed - replaced switch - no change; replaced capacitor (identical spec), no it runs only on low speed with new switch and new capacitor, but again only on high speed with old switch and new capacitor.
    I am stumped - please help!
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #2

    Mar 18, 2010, 07:04 AM

    First switch may be bad, and second switch may not switch identically as original?
    Do you have numbers from both switches?
    Mark 37's Avatar
    Mark 37 Posts: 7, Reputation: 1
    New Member
     
    #3

    Mar 18, 2010, 07:38 AM

    Thanks for quick reply! Switches same spec, same letters on back for wire placement, new one smaller physically, different brand. The old capacitor did have a part of case melted, so I am sure it was bad.
    I'm thinking either new switch or new capacitor is bad - but the way it behaves with the old and new switch makes me think the new capacitor must be good?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #4

    Mar 18, 2010, 07:43 AM

    Most Fan spped switches have a L, 1, 2, and 3. However some make different connections for each speed.
    Is their any other numbers other than L 1 2 3?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #5

    Mar 18, 2010, 08:02 AM

    After several years finially found the switching done on different Zing Ear Fan Speed Switches:
    ZING EAR ENTERPRISE CO.,LTD.
    CeilingFanrepair, If this is not on a Sticky, may be useful to add?
    Mark 37's Avatar
    Mark 37 Posts: 7, Reputation: 1
    New Member
     
    #6

    Mar 18, 2010, 12:39 PM
    Quote Originally Posted by Stratmando View Post
    Most Fan spped switches have a L, 1, 2, and 3. However some make different connections for each speed.
    Is their any other numbers other than L 1 2 3?
    Nope - just those, in same pattern on both switches...
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #7

    Mar 18, 2010, 01:55 PM

    They all have the same pattern L 1 2 3.
    If there are no other numbers It will be difficult to replace with exact.
    If you click on the above link, then a fan switch, it will also say the connections for each pull.
    High is L+1, medium is L+2, and low is L+1+2, another switch switches opposite from that, still another uses L+3 for high, L+2 for medium, and L+1 for Low. The correct switching is Important..
    Need numbers other than L123. Thanks
    Mark 37's Avatar
    Mark 37 Posts: 7, Reputation: 1
    New Member
     
    #8

    Mar 18, 2010, 06:09 PM
    Stratmando - I hugely appreciate all your help! After work tonight I got the old switch out. On one side is: SANTA E70469 3A-250VAC 6A-125VAC Patent 15119; the other side has, in addition to the L123, LJY280A and 108
    Thanks again for your efforts.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #9

    Mar 18, 2010, 11:14 PM

    Put the old switch back in with the new capacitor. THEN what does it do?

    Ceiling fan pullchain replacement and repair - Ceiling Fans N More
    Mark 37's Avatar
    Mark 37 Posts: 7, Reputation: 1
    New Member
     
    #10

    Mar 19, 2010, 05:53 AM
    [QUOTE=ceilingfanrepair;2279792]Put the old switch back in with the new capacitor. THEN what does it do?]

    In the order I've tried them:
    Old switch, old capacitor - high speed only
    New switch, old capacitor - high speed only

    New switch, new capacitor - low speed only
    Old switch, new capacitor - high speed only
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #11

    Mar 19, 2010, 06:37 AM

    Still looking for your switch, found these to add to a possible Sticky:
    CeilingFanParts.com - Switchco Products - Pull Chain Switches
    Mark 37's Avatar
    Mark 37 Posts: 7, Reputation: 1
    New Member
     
    #12

    Mar 19, 2010, 09:27 AM
    [QUOTE=Stratmando;2280101]Still looking for your switch, found these to add to a possible Sticky:

    Thanks for the link - I called them; they don't carry Santa switches; the nice gal there suggested I try switching the position of the white and black wires on the new switch. I did that (new switch, new capacitor); now I have high and low speed, no movement on middle speed.
    Progress at least! Thanks again
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #13

    Mar 19, 2010, 09:43 AM

    I googled this number and found 1 had sold on Ebay and found no more, the number that helped was:
    LJY280A
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #14

    Mar 19, 2010, 10:41 PM

    I don't think the problem is the switch. Usually when they fail, they don't work at all. The only case I've seen is when fans were left on low in a greasy environment for decades, the contacts got so dirty they wouldn't work on other speeds.

    The replacement switch wouldn't need to be the same brand. Ceilingfanparts.com has a way to match them up.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #15

    Mar 20, 2010, 07:03 AM

    CeilingFanrepair, what is the crossover number?
    I have seen things with multiple contacts where 1 contact, not all, fail at the same time.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #16

    Mar 20, 2010, 09:30 PM

    Crossover number?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #17

    Mar 21, 2010, 06:36 AM

    Hes trying to find a switch that is Identical or will crossover to a
    LJY280A.
    I had no luck finding on ceilingfanparts.com, you may know how to navigate their site and find a replacement? Thanks
    Mark 37's Avatar
    Mark 37 Posts: 7, Reputation: 1
    New Member
     
    #18

    Mar 21, 2010, 10:31 AM

    Appreciate the help, guys - the ceilingfanparts.com link you sent (toll-free phone)carries a ZingEar replacement, Stratmando, so I'll be good to go when it gets here. Thanks again!
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #19

    Mar 21, 2010, 10:45 AM

    Good deal, what a pain huh.
    If you forgot the colors to numbers on the switch, give us the colors of the wires and we may have the solution.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #20

    Mar 22, 2010, 09:13 PM

    NOOOOO.

    Don't forget to number the color of wires on the switch!!

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ceiling fan repair [ 2 Answers ]

I have an Encon celing fan & light fixture. The pull chain switch for the fan broke. I bought another one but apparently was not compatible, so it did not work. I live in the Bahamas and the switch I need is not available here. Can I wire it without the pull chain switch to get just one speed...

Ceiling fan repair [ 1 Answers ]

Hamptonbay ceiling fan-- fan pull broke can that be replaced with a toggle switch or you need replacement part-- does home depot have these

Ceiling Fan Repair [ 3 Answers ]

My fan operates properly in the reverse direction (counter clock-wise) but only hums in the forward direction (clock-wise). Is the directional switch malfunctioning or could it be something else? Figured that if it ran in reverse, the motor windings & capacitor are OK.

Ceiling fan repair [ 2 Answers ]

Hi there. I have a remote control (no pull) hampton bay ceiling fan. I originally hooked it up to a wall plug with a dimmer. Bad! It worked for a while until the little black box blew up! I then changed it to a wall plug without a dimmer and replaced the little box. Since then, the remote works...


View more questions Search