 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ceiling fan repair
I have an Encon celing fan & light fixture. The pull chain switch for the fan broke. I bought another one but apparently was not compatible, so it did not work. I live in the Bahamas and the switch I need is not available here.
Can I wire it without the pull chain switch to get just one speed setting? If so how? |
||||
|
||||
|
Contact CeilingFanParts.com Home for the correct replacement switch. If they won't ship to the Bahamas, I will personally deliver it if you pay my flight, hotel, and stay on the beach ;) -22 degrees in Wisconsin |
||||
|
||||
|
You can also try westinghousefans.com they bought out Encon.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hamptonbay ceiling fan-- fan pull broke can that be replaced with a toggle switch or you need replacement part-- does home depot have these
Need to replace the 3 speed fan switch in a Hampton Bay fan. The new switch has L,1,2,3 holes on it. My wire colors are black, brown, gray, purple. Which goes where? Thanks!
My fan operates properly in the reverse direction (counter clock-wise) but only hums in the forward direction (clock-wise). Is the directional switch malfunctioning or could it be something else? Figured that if it ran in reverse, the motor windings & capacitor are OK.
Hi there. I have a remote control (no pull) hampton bay ceiling fan. I originally hooked it up to a wall plug with a dimmer. Bad! It worked for a while until the little black box blew up! I then changed it to a wall plug without a dimmer and replaced the little box. Since then, the remote works...
View more questions Search
|
