 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How do I install Microwave Oven over Stove that is in a corner?
We are building a log house with the stove/range in the corner at a 45 degree angle. I want a micro-hood vent combo above it. We are mounting the cabinets ourselves and have no idea how to proceed!
|
||||
|
||||
|
You will have to find a microwave that is corner mounted above the stove, it is important to follow the specs and make sure you have the proper clearance above the burners to prevent fires and or heat damage to the microwave. I suggest you search the website of the brand you are lookinh for. Good luck. |
||||
|
||||
|
Over-the-range microwaves are all 30 inches in width, just like the upper cabinets above a 30 inch range. It doesn't matter that its going in a corner, as the sides of the microwaves don't interact with any cabinetry. The microwaves attach to the wall using a metal plate that anchors to wall studs, and then with bolts down through the upper cabinet. To sum up, the only thing that matters (as far as your "corner" question) is the wall and the cabinet above the proposed space. |
||||
|
||||
|
Hey applguy: You have no contact info. I'm looking for a Mid 80's Vintage Sanyo/Kenmore Micro Convection Service manual. The Sears model # is: 564.8668410, Sanyo Model is EM-5525 The control board part number is: 12360 Any service manual containing the control board part number is wanted. Any possibilities? |
||||
|
||||
|
According to Sears, the original part number for the control was 12360R, but has been substituted to RFR-CGI, which their site states they have in stock for $150. I am getting the impression that its not a real part, but an offer for you to return your control to them for repair, afterwhich it is returned to you. There are several companies in the US that offer this service; one of which is CG Industries ("part number RFR-CGI looks alot like "refer to CGI"). CGI can certainly be contacted at www.cgiltd.com, where you would find an order form and phone number. I have had good luck with controls I have sent to them for repair. Good luck. |
||||
|
||||
|
I did find them before. A resistor and opto isolator are popped on the circuit board at a minimum. I have the obsolete part in hand. There are some other issues too, but I can deal with them too. RFR-CGI should mean Return for Repair and the price they have in their price list is $96. I do appreciate the help though. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have an older 1989 model year microwave that needs to be replaced. I am unsure as to how it can be removed. Any help?
It doesn't really matter what brand at this point. I just want to be sure I can do it and have the necessary tools. Many thanks in advance
How much room is needed between micowave oven and reg oven? Will the steam from the food you cook mess up the sensors for the buttons on microwave? My microwave is installed and I have 20 in between the bottom of microwave and oven. Thanks.
I have a GE Spacemaker XL1800 over-the-range Microwave oven that I need to remove and replace with a newer model, different manufacturer. As I recall the oven slides into a back mounted hanger. My question is how do I get to the screws or bolts that release the oven from the hanger so I can pull...
View more questions Search
|
