Ask Experts Questions for FREE Help !
Ask
    westitzer's Avatar
    westitzer Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 17, 2010, 08:59 AM
    Are burner bowl seals available for Kenmore gas counter-top units?
    Seals are falling apart from heat and age. The Kenmore # is WB32M0010.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Mar 17, 2010, 06:00 PM

    Yes, but locally might get you a better price. http://www.searspartsdirect.com/part...mber=WB32M0010
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Counter top burner does not go completely off [ 1 Answers ]

We have a 4 burner counter top whirlpool range top stove. The small burner on the back left side does completely turn off. The hot light remains on and the burner is still warm.. not hot.. but warm. Something we can do? Or should I just call an electrican.

Change Kenmore seals [ 1 Answers ]

Both seals on my Kenmore refrig and freezer are leaking. How do I change these?

Warped counter top [ 2 Answers ]

I have been in the process of making a bathroom cabinet. The countertop is made from 2" oak and is 22" wide and 60" long. heres the problem. i started with 4 pieces of oak about 6" wide and alternated the growth rings and glued them together.. all was good until I cut out for the sink. Now the...

Gas stove top burner not lighting [ 1 Answers ]

I have a GE gas stovetop and one of the back burners is no longer lighting. I have soaked and cleaned all removeable parts and dried them to no avail... nothing is clogged. I have also tested to see if the electric starter is still flicking when I turn on one of the other burners, and it is. I...

Gas Stove Top Burner doesn't light [ 2 Answers ]

I have a GE gas stove top. One burner refuses to light (or takes forever). When I turn the knob/dial to the 'light' setting, I hear the clicking noise. I believe that is the ignitor arching/lighting. But the gas does not come through. I have to turn the dial back and forth from one end of...

View more questions Search