Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Air handler Heating coil power but does not get hot
[ 1 Answers ]
I have International comfort air handler model #nfcp4800c3 and heating coil is receiving power but is not getting hot. Please help trying to help elderly couple that are financially bad time and are suffering.
Replacing contactor on heating/air condenser
[ 6 Answers ]
My outside heating/air unit will not turn on . I opened the panel and if I push this little spring loaded thing it contacts with a small circular object and the unit kicks on, when I release it turns off. It's a brand new unit, about 5 or 6 months old. Can I fix the problem myself. Repair guy can't...
Bryant Heating Unit not blowing hot air/not shut off
[ 1 Answers ]
I have an electric Bryan Model ck5bxa042000aaa. The unit has stopped blowing hot air when set on heat(digital thermostat). When I turn the thermostat off it just continue to blow air. Any help would be greatly appreciated.
Code 41 on Bryant air handler
[ 6 Answers ]
Equipment: Bryant Variable Spd 4-Way Multipoise Furnace Model 315AAV060110 package with Bryant Condensing Unit Mod 38HDC060-321. Unit in Florida and issue with cooling operation. Problem start: Odor elec burn at registers. Powered off unit and called repair. Tech did shallow/sloppy diagnostic...
Replacing Thermostat for Heating and air cound.
[ 1 Answers ]
I am replacing a Ge weathertron Thermostat with a Honeywell RTH 7000. The terminals are marked the wires ar colors I would like to know what the letter distinction is for the letters. For example the black wire is on X2 what would I put the wire on in the RTH 7000. It would simplify the... View more questions Search
|