Ask Experts Questions for FREE Help !
Ask
    jguy14's Avatar
    jguy14 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 29, 2008, 07:05 AM
    Bryant Heating Unit not blowing hot air/not shut off
    I have an electric Bryan Model ck5bxa042000aaa. The unit has stopped blowing hot air when set on heat(digital thermostat). When I turn the thermostat off it just continue to blow air. Any help would be greatly appreciated.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Nov 29, 2008, 08:36 AM
    If this is a inside electric heater usually one of the heat sequencers controls the blower. It could also be a relay. The circuit will need to be tracked down to find the ofending component. Wiring diagram is posted on the back side of the blower access door.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant Secondary Voltage Fuse keeps blowing [ 7 Answers ]

I have a Bryant 373LAV horizontal furnace and the 3 amp secondary voltage fuse keeps blowing. I swapped the thermostat with the same problem.

Heating unit blowing cold air [ 1 Answers ]

I would like to know why my unit is blowing cold air when it is set on HEAT?:confused:

Air/heating unit outside running but not blowing air into home [ 1 Answers ]

Was wondering if anyone would know, my main unit outside, will turn on,fans on it are running, but its not cooling house, no air coming threw vents in house, if we leave air/heating unit running outside ,it starts to sweat,theirs water on top of the unit, not sure if its freezing up or not ,it was...

My bryant heater is blowing cold air only [ 2 Answers ]

When I put it on auto and heat doesn't work, if I put it on fan and heat it blows cold air only

Blower does not shut off on 15 yr old Bryant heating unit [ 2 Answers ]

The blower on my 12-15 yr old Bryant keeps going ignoring the t-stat stetting. I taught it was the t-stat, I replaced it and it still does the same thing. About a year ago the board was replaced with a newer one that has a fuse (3 amps) And was told that with the fuse it would prevent it from...

View more questions Search