Ask Experts Questions for FREE Help !
Ask
    water77's Avatar
    water77 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 11, 2010, 02:50 PM
    How do I test gas pipe
    How do I test gas pipe
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #2

    Mar 11, 2010, 08:36 PM

    Open the link below it has some good advices form the experts it may help you, Thanks.

    John

    https://www.askmehelpdesk.com/plumbi...ipe-11521.html
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #3

    Mar 12, 2010, 11:24 PM

    Cap off all outlets, pressurize with air to 15 psi for 10 minutes. The psi and length of test may vary according to where you live.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to pressure-test gas pipe [ 15 Answers ]

Hi again! First, MANY thanks to you experts for the help I've gotten in the last month. I passed my plumbing inspection for my new bathroom and kitchen! Now, on to one more little one. I'm installing gas lines. The house was previously on oil heat and all other appliances were electric,...

Is schedule 40 pipe the black gas pipe they sell at menards [ 0 Answers ]

The plans for a go cart says to use schedule 40 pipe is that thick enough walled 3/4 pipe

Attaching properly gas flex pipe to gas pipe and gas stove [ 5 Answers ]

How do I properly attach the flex pipe to the gas stove on one end and the supply pipe on the other end? Do I need a gas poxy? If so what is the proper method of application--on both sides of the attachments (flex pipe and gas supply pipe/stove) or on just one, how much is enough? How tight do I...

Attaching a gas pipe to a new gas stove [ 1 Answers ]

I just got a new gas stove replacing an electric stove. How do I correctly attach the gas line?

Natural gas pipe in bsmt is touching gas pipe [ 2 Answers ]

I just bought a house and in the basement the single wall furnace flue is touching the dark iron natural gas pipe, just before it enters the brick chimney , the water heater also has single wall flue that runs through wood structure. The previous owner put coffee cans around the flue, he cut off...

View more questions Search