 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Trane xe80 blows cold after igniting fine for a while
It will work fine for even up to an hour... then it will stop igniting and blow cold air. I have to manually reset it at the thermostat or it will continually blow. I have cleaned the ingnitor scensor and that doesn't work. It works fine in warmer weather, but as it gets colder the symptoms come back.
|
||||
Check out some similar questions!
Blowing cold hair flames stay on only a few seconds and shuts off meanwhile furnace blows cold air themostat is set at 70
I have an Trane XR80, it is blowing cold air, and it looks like it is trying to ignite but it does not.
My heater start working fine , the flame comes on, the fan runs well and blows hot air, then when the flame cames off, the fan continues to running blowing cold air and the never stop, blowing cold aiir the rest of the time? I changed the fan and the capacitor, Is it a heat sensor? What can be the...
From my earlier post ignite for a few seconds the stops, now, heat commanded, blower motor runs, no ignition, and flashes code 22 Help!
This morning I woke up to a cold house, the furnace was blowing away and only blowing cold air. I checked the thermostat and the heat was set at 72 but the house was still at 66 degrees. I cycled the furnace on and off but still there was only cold air blowing from it. When I last checked before...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
