 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a Trane XR90 that was showing a solid diagnostic light. Could wiggle the wires and the furnace would work for a few hours. Solid light wiggle the wires and board = heat. Finally wiggling wouldn't work. So I replaced the IFC board. Went to turn every thing on and now 4 blinks on the...
My 1988 honda will not idle when warm we have rebuilt the carb. Replaced vacuum lines and still when it gets warm the engine wants to die it runs good when you are driving it. It only dies when you are idleing.
A fellow scrounger rescued a Shop Fox W1685 Dust Collector from the garbage man recently and passed it on to me. The report from the original owner was that the motor was bad, but it could have been a switch. When I got it, the switch cover and the motor wiring cover had been removed and the...
The furnace in my vacant rental property does not light. The blower runs but the igniter never glows and the gas valve does not open. The LED blinks once which means the burner limit circuit is open. How do I replace the burner limit circuit? Inside the furnace cover I found the electronic...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
