Check out some similar questions!
Installing closet flange where old flange top non existent
[ 3 Answers ]
I am flooring in the basement bathroom and need to be able to set the toilet at a higher level. The flange part of the flange has been removed - there is now a pipe with the tubular part of the flange glued into it. How do I install a new flange with the appropriate extensions?
Hole in floor is larger than closet flange, and the flange may be too low
[ 3 Answers ]
We recently put down ceramic tile in one of our bathrooms. A friend of ours did the job for almost nothing, as he had most of the required supplies left over from another job, including tile. Now there is water leaking from the base of the toilet. After scouring the DIY sites on the internet, I...
How do I attach closet flange spacer over old flange
[ 1 Answers ]
I recently installed a new tile floor in my bathroom, and in doing so, raised the level of the floor. I went out and purchased a closet flange spacer kit and it came with the spacer and two rubber gaskets. I need to know how to attaché these. So I put the first gasket on, then the spacer, then do I...
Closet Flange
[ 1 Answers ]
My toilet was not sitting right on the closet flange. I pulled the toilet up and found out that the closet flange is flared up where the closet bolts go. I do not want to tear the whole thing apart and waste a lot of money if I can fix it myself. Does anyone have any suggestions on the best why...
Closet flange & vertical drop
[ 3 Answers ]
HAPPY THANKSGIVING EVERYONE! My husband & I are relocating the toilet in our bathroom. My question is…can I have a vertical drop (straight down 3’) from the closet flange (4” pipe), connect to a 4x3 closet ell, connect to a 3” pipe (4 foot run @1/4”/foot), connect to a sanitary tee (for the... View more questions Search
Add your answer here.
|