Ask Experts Questions for FREE Help !
Ask
    jc_moor's Avatar
    jc_moor Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Feb 19, 2010, 05:09 PM
    Fuel solenoid
    Can I disconnect the fuel solenoid wires at the carburetor on a briggs stratton engine model # 445677?
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Feb 19, 2010, 05:16 PM

    If you want to by pass it you'll have to take it off and cut the needle off the inside
    hayjoe637's Avatar
    hayjoe637 Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Aug 7, 2014, 10:32 AM
    I have the same engine model number, find I have to unplug my solenoid to have it run good. When I plug I back in, it floods and dies as soon as I engage the deck or try to run at hi speed
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Fuel solenoid [ 2 Answers ]

How do I remove the fuel solenoid from my briggs and straton 14hp engine.. model # 287707?

Fuel solenoid [ 9 Answers ]

I have an 18 hp Briggs. It will not start. Was running great then just quit. Was told to check the fuel solenoid. I did! Put it back in and it cranked for a second or two. Heard stories about this same event and putting in a new solenoid did not seem to help. Should I pu a new one in? :confused:

Bad fuel solenoid? [ 2 Answers ]

If I spray starting fluid or pour a little gas in my carb will my mower start if my fuel solenoid is bad

MTD Briggs 16.5 fuel solenoid [ 11 Answers ]

How can I determine if I have a bad fuel solenoid on my mower. Mower turns over great but will not start. Had fuel dump into the oil - changed it and dried out the valve cover and spark plug. Disconnected the kill wire on the coil. Gets spark when tested plug on head. Any other suggestions?

View more questions Search