Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
High Hat lighting
[ 1 Answers ]
How do I space high hat lights in a room?
New Can lights Tripping the breaker
[ 4 Answers ]
I jumped the power for three 55w can/flush lights from an existing outlet. The outlet still works. The lights are wired in parallel and will work perfectly if wired without a switch. As soon as you put the switch in there and turn it on, it trips the breaker. I can't figure it out - I even...
Breaker pops when lights go off
[ 5 Answers ]
Ok basically I am doing some construction in the basement and I am putting lights in a closet I am building and so I got them all hooked up and I had the lights on when I first switched on the breaker everything seemed fine. But to my dismay when I switched off these lights the breaker popped. I...
Replacing Circuit Breaker with Higher AMP Breaker
[ 8 Answers ]
Excuse me, I did look at the code book as is suggested in your Sticky. The NFPA may answer this question, but I am not knowledgeable enough to recognize it: Our offices are upstairs in an older (renovated home) building with modern wiring. We have 4 computers, 3 printers, and miscellaneous with...
Breaker Box Amps rating & Number of breakers installed
[ 1 Answers ]
I have a question in regards to amps allowed in a breaker box. My breaker box has a label stating that the box has a maximum load of 200 amps, but that it is convertible. I really don't know what the convertible part means. If I look at the breakers installed, these add way more than 200 amps. ... View more questions Search
|