Ask Experts Questions for FREE Help !
Ask
    cshaugh's Avatar
    cshaugh Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Feb 13, 2010, 03:44 PM
    replacing lennox thermostat w honeywell - wiring question
    I have an old mechanical (mercury switch) lennox thermostat driving a heat pump - I am trying to replace with a Honeywell RTH7500D. The wiring is confusing as the Lennox matches nothing in the manual. I found a matrix on here that seemed to explain the Lennox thermostat quite well and when I measure voltages for heat, emer heat, cool, fan, etc it seems to be correct. The terminals are as shown below with the parentheses noting my understanding (so far) of each one. There is one terminal with NO label. It's voltage levels appear to match those of the emergency heat terminal exactly (i.e. it is 24 v when emerg heat is on). The terminals are noted below. Anyone know what the blank goes to and what it should be connected to on the Honeywell?

    R (cool); V (hot); F (fan blower); M (heat pump compressor); BLANK (no idea); E (emergency heat); X (common)
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 13, 2010, 04:15 PM
    Old lennox thermostat exact model number?
    cshaugh's Avatar
    cshaugh Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Feb 13, 2010, 05:03 PM

    Looks to be 3AAT86B38B1 -- does that sound like a viable model number?
    cshaugh's Avatar
    cshaugh Posts: 3, Reputation: 1
    New Member
    		  
    #4

    Feb 15, 2010, 05:39 PM
    Old lennox thermostat exact model number?

    Looks to be 3AAT86B38B1
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing Lennox Thermostat with Honeywell Thermostat [ 2 Answers ]

I have a Lennox T90H110A137 Thermostat with the following terminal letters and wire colors: G - blue wire F - red wire C - green wire H - yellow wire V - white wire I want to install a Honeywell RTH6300B Thermostat. According to the RTH6300B Installation guide, it tells me to ignore wire...

Wiring conversion lennox thermostat 28g9801 to honeywell th8320 [ 0 Answers ]

looking for thermostat wiring conversion lennox 28g9801 to honeywell th8320 lennox term. Letters x, m. m2, vr, r, f, a, y, L, & (e not used) honeywell letters (rc & r factory jumped together), o/b, y, g, c, y2, L, e, aux, s1, s2 Thank you

Lennox thermostat replacement with Honeywell-wiring [ 2 Answers ]

I am trying to replace a heat pump thermostat. It was a Lennox Thermostat and I am replacing with a Honeywell R TH3100C. The letter wiring designations do not match up. On the Lennox I had R, V, F, M, L, A, Y, X the E (did not have any wiring hooked to it). My options on the Honeywell is E, AUX, Y,...

Replacing Honeywell with Hunter Thermostat Wiring [ 11 Answers ]

I'm replacing my Honeywell T841A1423 thermostat with a Hunter 44660 thermostat but can't cross reference the wiring references: Honeywell are: W2, W3 G, R, O, Y, X Hunter are: Y1, RH, RC1, RC, Y/O, W/B, G

Wiring question replacing Honeywell thermostat w/Hunter [ 0 Answers ]

I am replacing an old standard Honeywell thermostat (model T8034C) with a Hunter programmable digital model 44110. I have a 5-wire system. The wires are color coded and the Honeywell labels match the wire colors. Those are: White, Yellow, Green, Orange, and Red. THe only labels on the...

View more questions Search