Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Splicing pvc pipe
[ 7 Answers ]
I need to connect a "T" to an 1.5" underground pvc pipe. To fit properly a 1" space must be cut in the pipe. The "T" is obviously larger than the opening, how can this be done?:mad: :confused:
How to clean a PVC joint
[ 7 Answers ]
I have a very tiny crack in a PVC elbow in a kitchen sink drain pipe . The elbow connection is in the basement where it transition down from the kitchen to a pipe that goes into the main drain pipe. The challenge is that elbow is 2" - maybe less - below another coupler joint. I have no ability...
Leaking pvc joint
[ 1 Answers ]
I just instsalled a new section of 4 inch pvc drain pipe. One connection is dripping. Is there a way to seal it without a re-do?
PVC joint under bathtub is leaking
[ 5 Answers ]
Hi, I just found that when the water was coming out of overflow drain of the bathtub, the PVC joint under bathtub was leaking. Is there any eay way to seal the joint without replace the PVC joint? Thanks Sheng
Need help with water carrying pvc joint
[ 5 Answers ]
Pvc pipe joint between floors has become unsealed so that it leaks minutely. So far anyway. Is there a product that will reseal this joint. Otherwise I will have to cut a large hole in the ceiling to remove and replace the old joint. It is a straight connection not an elbow if that makes any... View more questions Search
|