Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Plastic PVC Broken in Metal Pipe Joint
[ 2 Answers ]
Was digging in the yard and broke the PVC pipe connected to a metal pipe inside the joint. The PVC and joint is 3/4 inch however the PVC is glued inside the metal and now I can't get the old PVC out of the metal joint to replace it. I don't have any tools to cut the metal pipe. Is there anything...
PVC septic access pipe broken off in union joint.
[ 5 Answers ]
Hello, We recently bought an older (54 yrs) home with a septic system. The tank was replaced 14 years ago and has a PVC access pipe on top of it. This pipe was broken off in the union (am I using that term right? I'd call it a collar, but I'm not a plumber) set in the top of the tank before we...
Broken PVC (vent/drain) pipe at joint
[ 1 Answers ]
So I had a clogged drain and I was checking the trap. I was under the house and was working on the pipes when I accidentally broke the drain pipe off at a T joint just below the trap. How can I remove the broken end from the joint since it was solvent welded in? Or what else can I do?
PVC joint under bathtub is leaking
[ 5 Answers ]
Hi, I just found that when the water was coming out of overflow drain of the bathtub, the PVC joint under bathtub was leaking. Is there any eay way to seal the joint without replace the PVC joint? Thanks Sheng
Need help with water carrying pvc joint
[ 5 Answers ]
Pvc pipe joint between floors has become unsealed so that it leaks minutely. So far anyway. Is there a product that will reseal this joint. Otherwise I will have to cut a large hole in the ceiling to remove and replace the old joint. It is a straight connection not an elbow if that makes any... View more questions Search
|