Ask Experts Questions for FREE Help !
Ask
    glennbrown's Avatar
    glennbrown Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Feb 13, 2010, 01:52 PM
    Trouble shoot ceiling lamp
    My hunter Ceiling fan/light kit and remote has worked great for 3 years. I pushed the power button the other day and there was a pop and the light did not come on. I replaced the transmiter battery (nothing). I replaced the remote (Transmiter and receiver) and inspected all the wire connections, but the lights still did not work.
    Can you give me any suggestions on repairing my light?
    Thank you
    Glenn
    [email protected]
    cdad's Avatar
    cdad Posts: 12,700, Reputation: 1438
    Internet Research Expert
    		  
    #2

    Feb 13, 2010, 02:45 PM

    Do you have power going to the light circuit? Are the bulbs in good condition? Have you tried bypassing the remote and connecting the lights directly to "hot" to see if they come on?
    glennbrown's Avatar
    glennbrown Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Feb 13, 2010, 03:14 PM
    I have 115 volts at ceiling, I put a new remote receiver & transmitter in but still no voltage out the bottom to the light. I will try bypassing the remote next.
    Thank you
    Glenn
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #4

    Feb 13, 2010, 03:36 PM

    Does the fan have pullchains?

    Pop = receiver problems, usually. Contact Hunter for replacement parts.
    glennbrown's Avatar
    glennbrown Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Feb 13, 2010, 04:24 PM

    Yes it does.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #6

    Feb 15, 2010, 05:09 PM

    Since it has pullchains, you can just remove the receiver and wire the fan without it.

    Ceiling Fan Wiring, Ceiling Fan Wiring Technical Help, Do it Yourself (DIY) - Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trouble shoot heating units [ 2 Answers ]

Hello My unit outside is not coming on because the fan is frozen. Can I pour hot water on it to unfreeze.

DSC P93 trouble shoot [ 1 Answers ]

Hi, I own a DSC P93 cyber shot camera. Recently I happened to see my pictures shot were having horizontal lines all over the picture. When I shoot without flash light then it shows the image like an over exposed image. I tried to reboot the camera, format the memory stick & all means but still...

Trouble shoot ceiling fan remote stopped working [ 2 Answers ]

I have a hunter ceiling fan/light combo controlled by a Harbor Breeze universal remote that simply stopped working (the remote will not turn the light/fan off/on). The fan does have pull chain, but I do not know how to bypass the remote to use the fan manaually. I've checked the switch, remote...

How Do I Trouble Shoot A Boiler? [ 1 Answers ]

MY central heating boiler light is on but there is no hot water and the heating won't work either. I know there is a red re set button which I have tried pressing for 3 seconds then turned the heating back on but it didn't work. Any advice? Thanks.:)

Trouble shoot transaxle [ 2 Answers ]

Hello, dave from Wisconsin, I have , I believe to be a 1993 sears lawn mower with a spicer transmission in it. The model for the lawn mower is-- 502.255090 serial no. 28403837. When I tied putting the lawn mower into any gear the mower would not move, I checked the belts and they're fine , I...

View more questions Search