 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
 Originally Posted by bnblang
LxWxH This is for angle of spread Then Size in GPH is based on the fire rate of the boiler or furnace (IE BTU's) Then you need to decide is you should choose solid,hollow,or combo of both for the flame cone. See below for examples and instructions http://www.delavaninc.com/pdf/total_look.pdf Monarch Oil Burner Nozzles - Spray Patterns Ontor.com HVAC / Oil Heating Products / Oil Burner Nozzles http://hago.danfoss.com/PCMPDF/DKBDPD080A122.pdf This is something that you do not guess about so I just provided some facts for you. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Dear Reader from Ask Me: I have a Oil Heating system almost 10 year old with a Beckett Oil Burner. It has been very loud from the day One. RWB -Beckett Model AFG . I am wondering if a new Burner would be any quiter? Another problem I have is it starts works for a while stops and all of...
Hi! I am looking for a nozzle line for a Beckett AFG Type F Oil Burner with a 5inch air tube. If you can’t get that part alone then please send price and what is included. The nozzle tube is an “L” shaped aluminum oil line that fits into the nozzle housing located under the electrodes. If...
Where can I buy a nozzle for a beckett oil burner? Does home depot or Lowe's carry parts?
I have a Beckett AFG model WL-4504 burner, Weil-McLane WTGO-4 oil boiler that runs a f4 head. The specs call for a 1.25X80B nozzle with 100psi pump pressure. What I found in my boiler was a .75X80A nozzle. I have not verified pressure yet. The shutter is set to 2 and the band to 0. Specs call...
I have no contract for yearly cleaning I have changed the filters and oil strainers, I am getting oil in the line, but NO Flame. Is it possible to cean the ignition nozzle? Can anyone recommend a fix to this problem... Snow is in the forcast. Please help.
View more questions Search
|
