Ask Experts Questions for FREE Help !
Ask
    luxaire's Avatar
    luxaire Posts: 2, Reputation: 1
    New Member
     
    #1

    Feb 11, 2010, 05:17 PM
    Furnace doesn't come on all the time but continues to try
    I have a luxaire 80 works fine sometimes but then tries to start but it won't for a while then start only to shut done quickly.
    luxaire's Avatar
    luxaire Posts: 2, Reputation: 1
    New Member
     
    #2

    Feb 11, 2010, 05:41 PM
    Luxaire 80 intermittent problem tries to start over and over
    The unit is a luxaire model #tg9so80b12mp11a. I get a different code each time it acts up the most reoccuring code is control failure. I checked power and ground all OK.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace continues to heat after set temp [ 6 Answers ]

My furnace will continue to run even though my set temp has been reached. For instance I set the thermostat at 68 and I get 75. I end up shutting the furnace off to avoid wasting oil and sweating to death. It does not run constantly but fires off and on.

Bryant furnace continues to blow 3 amp fuse w/ A/C [ 1 Answers ]

I have a 10 year old bryant furnace, and recently the 3 amp fuse on the control board inside the furnace continues to blow when it is hot out and the A/C is running a lot. From what I read this is the t-stat wiring fuse, indicating a short in a wire. Not sure how this could be the case, or how I...

Furnace continues to run [ 9 Answers ]

Hi! I have just purchased a slightly used home. The furnace I knew was going to be a problem but was hoping to get through the winter. It's very old and just two days after moving in the furnace has developed a problem that it doesn't turn off. I disconnected the thermostat and the furnace...


View more questions Search