 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I am going from a Rheem to a Hunter and need to know what wire goes where
I am going from a Rheem to a Hunter and need to know where each wire goes. I have hooked the yellow wire to y/o, the green wire to g, and white to w/b. I have three wires left and they are red, tan, and orange. I need to know where the rest of these go. I also have a blue and black wire but they were not used in the Rheem thermostat. Please help
|
||||
|
||||
|
Did you make a note on what each wire was attached to on the rheem tstat?, its very important,also what are the post labeled on the hunter? Did instructions come with the hunter,, Beware, You will be very lucky if the hunter lasts you 6 months if it works at all
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I'm not sure of the wire placement. I have a black and white wire attached to my old thermostat. The new thermostat has attachments labeled G, RC, Rh, Y/O, W/B, Y1. There is a jumper connecting RC and RH. Do I connect the black wire to RH and the white wire to W/B? Any help would be greatly...
Trying to replace an old thermostat with a Hunter 44860 and can't seem to get it to work. The wiring on the old Rheem unit is as follows - B - Blue Wire R - Red Wire G - Green Wire Y - Yellow Wire W2 - White Wire X - Brown Now the new unit has the following... note that it does not have...
I need help wiring my new Hunter from my old Rheem!
Currently, I'm trying to replace an old rheem thermostat with a hunter Model 44155C. The wiring colors are confusing to a novice like me. There are five wires: red, green, blue, yellow and white. The hunter thermostat has connections for RH, RC, G, Y/O, W/B, and Y1. The only two wires that I...
View more questions Search
|
