Ask Experts Questions for FREE Help !
Ask
    trymple's Avatar
    trymple Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 10, 2010, 07:53 PM
    Team fortress 2 trouble shooting os memory
    OK so I load team fortress 2 and I can play for like 30 seconds then it crashes and says that I am out of os paged pool memory
    Scleros's Avatar
    Scleros Posts: 2,165, Reputation: 262
    Hardware Expert
     
    #2

    Feb 10, 2010, 08:51 PM
    Questions:
    1. How much physical memory does your computer have?
    2. What size is configured for your paging file?
    3. Have you applied all the latest game updates?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Submersible well trouble shooting [ 1 Answers ]

My water stopped working at all points checked at the tank ( I have a sub. Pump,drilled well) it still showed pressure in the tank, checked breaker it was fine. Was waiting for the morn. To call plumber and in the midddle of the night the sound of the pressure switch could be heard. Now it seems to...

Trouble shooting my T.V. [ 1 Answers ]

I have an older model rear projection television, the video and sound both went out at the same time, anyone have an idea on what I need to change out

Trouble shooting furnace [ 3 Answers ]

Hello I have a Altra 90 SX Armstrong furnace that has a cycle problem. The model # is a GUK75D103A with a Heatcraft control board 404030001 Cat. # 70K98 The problem that I'm actually having is that it is going through its cycles OK, except the induced fan keeps running and won't shut off. ...

Trouble shooting [ 1 Answers ]

hi I have 1997 dodge ram 1500 4x4 my tail light went out and then the single light would . Cheeked out both. Bulbs on the right side, know the kicker is the hazzards work, the turnsignal works, if I step on the break.pleas help. Note I have replaced the turnsignal switch. still no luck.

Furnace Trouble shooting [ 1 Answers ]

I have an Coleman Evcon Furnace. Model #15020A the problem is I replaced the Inducer motor, and The furnace starts like normal but then the flames goes out after about a minute or two. The LED light says the Pressure switch is stuck open but it seems fine. I tried to replace the PC board but can't...


View more questions Search