 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Submersible well trouble shooting
My water stopped working at all points checked at the tank ( I have a sub. Pump,drilled well) it still showed pressure in the tank, checked breaker it was fine. Was waiting for the morn. To call plumber and in the midddle of the night the sound of the pressure switch could be heard. Now it seems to work fine again.Any ideas.
Darren |
||||
|
||||
|
A few things could cause this. 1) the over load on the motor kicked off and reset. 2) The small tube that supplies pressure to the control could have become clogged and then unclogged itself **OR** The "Pump Fairy " came in the middle of the night and repaired your problem. It's difficult to tell what went wrong when it's working normally. Good luck, Tom |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have an older model rear projection television, the video and sound both went out at the same time, anyone have an idea on what I need to change out
Hello I have a Altra 90 SX Armstrong furnace that has a cycle problem. The model # is a GUK75D103A with a Heatcraft control board 404030001 Cat. # 70K98 The problem that I'm actually having is that it is going through its cycles OK, except the induced fan keeps running and won't shut off. ...
hi I have 1997 dodge ram 1500 4x4 my tail light went out and then the single light would . Cheeked out both. Bulbs on the right side, know the kicker is the hazzards work, the turnsignal works, if I step on the break.pleas help. Note I have replaced the turnsignal switch. still no luck.
I have been having trouble with my water so I bought a new water pump, it's the submersible type for a well. The water would work for a short time then just stop. The new water pump does the same thing. I can't find anyone who can tell me what the problem is. The bladder tank pressure is reading 32...
How do I find out if a capaciter is bad or starter on a/c unit
View more questions Search
|
