Ask Experts Questions for FREE Help !
Ask
    SHRIZZELL's Avatar
    SHRIZZELL Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 7, 2010, 06:06 AM
    Slave cylinder replacement
    I have a 1996 honda accord. The clutch pedal has been getting little resistance /pressure for a while and now its going straight to the floor and not building any pressure when I bleed it. I just bought the slave cylinder and need someone 2 take me step by step through the replacement process.
    SHRIZZELL's Avatar
    SHRIZZELL Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Feb 7, 2010, 06:12 AM

    How 2 replace slave cylinder on 1996 honda accord
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #3

    Feb 7, 2010, 06:24 AM

    This write up should help:

    https://www.askmehelpdesk.com/cars-t...tml#post232189

    Any amount of air in the system will cause the pedal to go to the floor. It can be a real problem, once that happens. A power bleeder would be ideal. I use the fool-proof Brake Bleeder Economy One-Man, Cal-Van Tools, No. 247, brake bleeder. It cost $2.99 and has a one-way check valve.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Slave cylinder lost oil [ 2 Answers ]

OK I changed my clutch and is all back together and my slave will not hold oil I fill it up then I have pedel but after about 1/2 hour loose pedel is soft and no oil now can't see where it is gone but wanted to know is it possible to leak inside

Slave cylinder 2002 F250 [ 1 Answers ]

How do you bleed the slave cylinder on a 2002 F250. It has already been installed but I don't know how to bleed it

Slave cylinder hose [ 1 Answers ]

How do you remove slave cylinder hose for an 89 ford f150

Slave cylinder 94 chevy pickup [ 2 Answers ]

I replaced the cylinder but I have no clutch release at all,ican sit and pump the pedal and nothing happends

94 civic clutch master and slave cylinder replacement [ 1 Answers ]

I have a 94 civic ex 1.6 liter , and I need to replace the clutch master and slave cylinder. If anyone knows the proper way to do this and the location of the slave cylinder please let me know...

View more questions Search