Ask Experts Questions for FREE Help !
Ask
    ban-me's Avatar
    ban-me Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 5, 2007, 06:03 PM
    Slave cylinder 94 chevy pickup
    I replaced the cylinder but I have no clutch release at all,ican sit and pump the pedal and nothing happends
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Feb 6, 2007, 09:09 AM
    Did you properly bleed the new cylinder? I don't have the greatest equipment so bleeding for me is a two person job.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #3

    Feb 6, 2007, 09:02 PM
    You obviously have air in the system. Try opening the bleeder screw, pushing the clutch to the floor, and filling the clutch master cylinder reservoir with brake fluid until it flows out. Then, close off the bleeder screw, cap off the reservoir, making sure not to overfill it, and try the clutch pedal. I use a Cal-Van Economy One Man Bleeder to bleed my clutch and brakes.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1979 chevy pickup won't start [ 10 Answers ]

I have 1979 chevy pickup that just won't start I replaced the clutch drove it a couple of days and I just won't start I have plenty of spark and gas getting to the plugs I have replaced everything in the distrubetor I just can't figure it out please help Thank you:confused:

1978 Chevy pickup ignition timing [ 2 Answers ]

What is the recommended ignition timing for a 1978 Chevy pickup w/a 350 motor?

1989 Chevy pickup turn/stop lights [ 2 Answers ]

I own a 1989 chevy pickup extended cab, and have been having trouble with my right side panel of lights in the back of the truck, I replaced the panel and it worked fine for about 2 months, now when I disassemble and disengage the pigtail connector it will work fine until I step on the brakes and...

94 civic clutch master and slave cylinder replacement [ 1 Answers ]

I have a 94 civic ex 1.6 liter , and I need to replace the clutch master and slave cylinder. If anyone knows the proper way to do this and the location of the slave cylinder please let me know...

Headlights 1992 Chevy Pickup [ 1 Answers ]

I need to change the low beams on my 1992 C150 Chevy pickup and for the life of me I can not see how to get at the beams. Anyone got an idea how I accomplish this? Thanks Super Dave

View more questions Search