Ask Experts Questions for FREE Help !
Ask
    cpilotti's Avatar
    cpilotti Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 6, 2010, 07:48 AM
    G-U-40007508M Gas Furnace
    I have a question for a friend who has a furnace problem now. She has a G-U-40007508 gas furnace and on Desember 31st 2009 they stayed over my house after a small get together for new years 2010. Well the next day I found out from her that her pilot went out for her furnace as I went and relit the pilot while also looking for reasons on why the pilot went out (breeze of air ETC) the pilot lit for a month and went out again as I went over to her house again and she told me she heard a loud bang when the furnace went out. I turned the switch off and gas and checked the gas tubes for blockage and all was well. I turned everything back on and relit the pilot, the pilot was blue color, the burners kincked on and heat was being fed for about 5 minutes and the burner shut off while the thermostat was not satisfied, now when it tried to relight due to the thermostat not being sastified and a loud bang was heard and the pilot went out. Is this a problem due to a faulty gas valve?

    Chuck

Check out some similar questions!

My gas furnace doesn't light pilot ilght come on but gas doesn't come on [ 1 Answers ]

Gas furnace doesn't come on the fan for fresh air/exhaust and pilot light comes on but gas valve not letting gas in to burner so it doesn't light,but if I turn off power and back on three or four times it will work until house cools and need heat again

Do trane gas Furnace have belt and how to fix trane gas Furnace [ 1 Answers ]

I have trane gas Furnace and its stopped working the pilot is not working its keep shutting off and also the switch on and off is working but the pilot and burner is not working what should I do ?:(

Carrier Natural Gas Furnace main gas valve will not open every call for heat [ 1 Answers ]

We have a Carrier Weather Maker 8000 Natural Gas Furnace not functioning properly. We have replaced pressure switch, hot surface ignitor, flame sensor and control board. It will cycle 3 to 4 times and then not come back on. Is it possibly a bad coil on gas valve?:rolleyes:

Gas Furnace - gas will not flow after HSI lights [ 15 Answers ]

Goodman Furnace Direct Ignition - Blower kicks on - pressure switch works - HSI heats up for about 8 secs -- NO GAS - HSI goes out Status light just blinks slowly, continuously until I let go of the panel switch. Gas valve is ON - ball cock is open - plenty of gas pressure (hot water...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.