 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ceiling fan repair questions answered free
I have a hunter 52" ceiling fan that had three speeds. Now it goes from high with one pull of switch cord, then to medium on second pull, but goes back to high on third pull instead of low. Then off on fourth pull. I checked switch and capacitors, and test OK. Any help would be appreciated. Also is it safe to operate as is?
|
||||
|
||||
|
Test the capacitors again. 99% chance they are the problem. Ceiling Fan Capactors - Troubleshooting and Resources - Ceiling Fans 'N More And check with Hunter Fan Ceiling Fans, Air Purifiers, Humidifiers, Thermostats |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Check out these tips and explanations from our Electrical Expert. Of course, you're also welcome to post questions to this board for more information: Just click the "Ask about Electrical & Lighting" button at the top of the page.
I have an Encon celing fan & light fixture. The pull chain switch for the fan broke. I bought another one but apparently was not compatible, so it did not work. I live in the Bahamas and the switch I need is not available here. Can I wire it without the pull chain switch to get just one speed...
For the past two months I have been unable to use my Aloha Breeze 42" ceiling fan (model #: 93645 UPC #: 7-59590-99645-2), simply because the darned thing is coming free from the ceiling. Since I have only been renting this place for the past three months, I have no idea who originally had the fan...
I have a Hampton Bay ceiling with remote control. It is a rather large fan installed on a vaulted ceiling. The fan model is AC 385 (not sure if 385 is part of the model number). It has two light fixtures. One on above the fan and one below. Both are also remote controlled. I vacuum dust from...
How to repair a ceiling fan .it hums so it has power ,will not spin .What next?
View more questions Search
|
