 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Leaky Price Pfister Shower/Tub
Hi there - we have a 3 knob Price Pfister shower / tub head that has been leaking and we recently replaced the stems for both the hot and the cold. It is leaking less, by about 1/2, but it is still leaking. Is there any advice out there before we move on to calling a plumber or replacing the whole works? Do you think the white tapey stuff on the threads of the stems will help? I'm wondering if anyone has any advice before we spend any more dough.
Thanks so much! |
||||
|
||||
|
Hello MamaCo, You still may have debris left in the Shower/Tub faucet in side or bad seats, shut the water to the faucet remove the stems inspect the seats for any scratch marks if any replace the seats if not, turn on the water for a few second to flush out any dirt, install the stems and open the link below for info, good luck. John http://www.plumbingpartsdepot.com/pp3vlv.pdf |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My price Pfister bath/shower valve has a slight leak. I can't find any identifying model numbers on it. It is at least 30 years old. How do I determine replacement parts before I take the valve apart to replace the washers or the entire valve?
My daughter had been using my shower and one day I came home and found the handle on the spout had come out and there was a piece of plastic with a small rubber gasket on it. It does not seem to be able to fit. I am not sure if I am missing a piece or something broke off. This is the handle that...
I have a 3 handle system in our tub/shower combo. The problem is that when running bath water, the shower head will leak water. But the tub faucet does not leak water when the shower is running. I have replaced the diverter valve and it does not correct the problem. Both the hot and the cold...
I purchased a price pfister shower kit and it did not have an installation manual. They are closed today and their website does not have manuals on it. I just need to know how to install the valve. Can some one direct me to a site that will give me that info?
Hi! We have an old Price Pfister Tub and shower faucet. It has been dripping for some time now and I would like to replace the whole thing with something newer anyway. If at all possible I would like to do it myself. I have been doing some research and have found that the new OX8 valves have a...
View more questions Search
|
