Ask Experts Questions for FREE Help !
Ask
    Maggiemay500's Avatar
    Maggiemay500 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 1, 2010, 06:07 AM
    The snowblower is pushing the snow away instead of taking it in.Could the augers poss
    Could it possibly be the augers. Could they have been put back on the wrong side.
    Maggiemay500's Avatar
    Maggiemay500 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Feb 1, 2010, 06:10 AM

    The snowblower is pushing the snow out instead of taking it in. Could it possibly be the augers put back on the wrong way..
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #3

    Feb 1, 2010, 06:03 PM

    Hi,
    Yes if they were off to replace the shear pins or other manitenance.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to keep a snow thrower's augers from clogging up [ 2 Answers ]

The augers of my Troybilt storm 2620 clogs up. No shear pins are missing and the belts are fine. The snow was of the perfect snowball variety, not real heavy, but heavy enough. Will aerosol cooking spray work?

Snowblower leaves a trail of snow behind? [ 5 Answers ]

Hi, I just bought a 2006 Ariens 11528 snowblower. I've used it for two storms now and it leaves a trail of snow behind at every pass up and down of my driveway. It acts like it can't take in and discharge all the snow so it pushes it out the sides thus leaving a trail left and right as it travels....

Snowblower leaves piles of snow [ 1 Answers ]

Hi, I just purchased a Craftsman 10 hp snowblower and it leaves a pile line of snow approx. 6 inces deep only on the left side of the blower. The shear pins are fine. Can anyone give some suggestions as to what may be the cause of this problem. Thanks.

Craftsman snowblower augers turn slow [ 3 Answers ]

Hey guys, anybody know why the augers in my 9 horse craftsmen blower won't turn so well. It is about 8 years old (workhorse) and I have had problems shearing pins although they are currently intact. It would blow the light snow 4" in the main drive but at the end where the plow dumps, it would...

My Old Ariens Snowblower -trouble throwing snow [ 3 Answers ]

My older Ariens ST 824 model # 924-050 has been a real gem! But... yesterday while busting through a big drift of snow, it just kept clogging up. The snow was not really wet and heavy. I checked it out - the auger is turning, the shear pins are fine. I then pulled off the piece that exposes the...

View more questions Search