Ask Experts Questions for FREE Help !
Ask
    52roland's Avatar
    52roland Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 31, 2010, 10:58 AM
    Goodman pgj036100-1 blinks 4 times
    My goodman pgj036100-1 will start burners, heat for about 60 seconds flames go out shuts down and light blinks 4 times
    52roland's Avatar
    52roland Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jan 31, 2010, 11:26 AM
    Goodman pgj036100-1
    I can hear ignitor working trying to light burners but they don't ,after 3 times unit shuts down
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #3

    Jan 31, 2010, 04:22 PM
    Look on the back side of the service access door for a blink code. OR clean the flame sensor with fine sand paper or steel wool.
    Attached Images
      
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman GMS91155DXA LED blinks 3 times [ 6 Answers ]

First a bit of history: The furnace is almost 2 years old and worked all of last winter without any problems. Based on the information in the manual and some things I gleaned online, I replaced the pressure switch. Worked great ran all of last night and then starting this morning I get the same...

Goodman furnace troubleshooting/pgj036100-1 [ 1 Answers ]

It is a goodman gas pack unit Model PGJ036100-1 the burner will come on and burn for about 5 minutes then shutoff the high limit switch is not tripped. The burner will re-light and burn for 5 minutes again and keeps doing this over and over.

Goodman gmp board blinks three times [ 1 Answers ]

Code says ventor end switch. Where is that?

Goodman gks blinks 3 times , tired replaceing the pressure switch, no power to the ex [ 0 Answers ]

Tried replacing the pressure switch does not help, have a child and ill wife help

Goodman gmp board blinks three times [ 13 Answers ]

Blinks three times My goodman furnace does not ignite the HSI, and the board blinks three times. Is this the pressure switch or rollover, or perhaps something else

View more questions Search