Goodman gmp board blinks three times

tmnolan Posts: 1, Reputation: 1

New Member

Jan 16, 2010, 04:04 PM

Goodman gmp board blinks three times

Code says ventor end switch. Where is that?

hvac1000 Posts: 14,540, Reputation: 435

Heating & Air Conditioning Expert

Jan 16, 2010, 05:52 PM

It is in the venter motor.

Add your answer here.

Check out some similar questions!

Goodman GMS91155DXA LED blinks 3 times [ 6 Answers ]

First a bit of history: The furnace is almost 2 years old and worked all of last winter without any problems. Based on the information in the manual and some things I gleaned online, I replaced the pressure switch. Worked great ran all of last night and then starting this morning I get the same...

Goodman gks blinks 3 times , tired replaceing the pressure switch, no power to the ex [ 0 Answers ]

Tried replacing the pressure switch does not help, have a child and ill wife help

Goodman gmp board blinks three times [ 13 Answers ]

Blinks three times My goodman furnace does not ignite the HSI, and the board blinks three times. Is this the pressure switch or rollover, or perhaps something else

Goodman heater gmp075-3 3-blinks on board [ 1 Answers ]

I have a goodman heater gmp075-3, the problem is it don't work. Cleaned vent replaced the pressure switch. Still nothing. The board blinks three time which supposidally means a clog somewhere?? Please help if you can. Tom

Goodman heater gmp075-3 3-blinks on board [ 1 Answers ]

I have a goodman heater, I have cleaned out the chiminey pipe, replaced the pressure switch and it still will not ignite, can anyone point me in the right direction to repair this? Tom