 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Well water pump not working
Well water pump is not delivering water. The pressure gauge reads 15psi. I can not make out if the pump is running or now (I guess because it is a submersible pump... 4" Goulds ).
Water was flowing last night but when we woke up this morning we found very low pressure and soon no water. It is below freezing (was 10 F last night) Any suggestions? |
||||
Check out some similar questions!
I have a well house and a pump that is approximately 75 feet down. I had water today when I left today and upon my return 5 hours later there was no water in the house. I changed this pump approx 3 or 4 years ago... where do I begin to test? Could it be frozen?
This morning while conducting laundry the water stopped running. I had went down stairs and had replaced the pressure switch but this is still not the problem... the pressure switch when in the closed position sparks but the pump does not turn on... whats wrong?
It was around 19 degrees here in GA this AM. I left my water run last night so it would not freze up. This AM all was well untile about 9:30 then the well pump stopped working. It still had about 20lbs of pressure but will not kick back in. Could it be from the cold weather. Thanks for any...
We had cold weather and we lost our water. It still hasn't come back. We replaced a blown fuse but it still doesn't work. Does the pump come on even if it needs to be primed? It makes no sounds. Does this mean that the motor is burned out? Or do I just need to prime it? Thank you.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
