Ask Experts Questions for FREE Help !
Ask
    NeedToVent's Avatar
    NeedToVent Posts: 10, Reputation: 1
    New Member
    		  
    #1

    Jan 30, 2010, 07:02 AM
    Help Wiring Bathroom
    Can anyone help me with a wiring sequence for the attached drawing. I would like to control all the ovrhead lights with one switch and the fan with another. Is there anyway to get the light from the fan/light combo on the rest of the lighting cercuit? I will have a separate switch for the vanity lights. I have a 12/2 line going to a junction box in the attic to supply the bathroom off a 20 amp breaker.

    Thanks
    NeedToVent's Avatar
    NeedToVent Posts: 10, Reputation: 1
    New Member
    		  
    #2

    Jan 30, 2010, 07:08 AM
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    Jan 30, 2010, 09:30 AM

    Picture not opening
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #4

    Jan 30, 2010, 04:28 PM

    ..
    Attached Images
     
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #5

    Jan 30, 2010, 05:05 PM

    Hank,

    This a question, shouldn't the white conductor feed to the switch be shown as re-tasked to eliminate confusion?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bathroom wiring [ 3 Answers ]

I have power coming to a new bathroom and need to put in a gfi outlet,a ventilation fan,some lights and a jetted tub. Please draw me a schematic of how this should be done.If I need another line coming in please show where to take this power from. I would like a switch to control the vent fan and...

Bathroom wiring [ 1 Answers ]

I am wiring an elecric towel rail & blanket underfloor heating in a bathroom, I know this has to be done to IEE standards trough a flex outlet & an external fused connection unit. I just looking for conformation on what height I should put the flex out let in the bathroom. I am in Scotland, I...

Bathroom Wiring [ 1 Answers ]

I have read as many bathroom posts as I could find but still have a specific question. First I want to reiterate what I have gathered. Please verify the following for correctness. 1. Outlets and lights must be on separate circuits in a bathroom. 2. All outlets must be GFI protected by breaker...

Bathroom wiring [ 2 Answers ]

First question was answered somewhat,here's the scenario,remodeling bathroom,ran 20 amp service,wired in fan/light .light is wired for use by itself.Fan,light in tub,shower,vanity light and three outlets [one outlet is gfci,20 amp rating. Would like to use 15 amp switch for general light,this is in...

Bathroom Wiring [ 7 Answers ]

I am in the process of putting in a full bath and had a question regarding the wiring. I ran a #12 and #14 from the breaker and intended on using the #14 for the bath fan/lights and the #12 for the GFI outlet. I want to also run the 12 gauge from this GFI to one I intend to install in the...

View more questions Search