 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Lennox g51mp furnace warranty information
I have a Lennox g51 furnace and need to know the term of the warranty. Are there any circumstances where I would be issued a warranty of shorter duration than what the manufacturer authorizes? I have three of these that are 3-4 years old. I have been told by the selling/servicing dealer that my warranty is parts and labor, one year. I have seen on this site indications that it might be between 5 and 10 years on certain issues. Thanks for your assistance. J
|
||||
|
||||
|
I believe you have a longer warranty BUT it is from Lennox and not your dealer. Most dealers give a one year complete warranty but the factory covers the parts for a longer time especially the heat exchanger.
What this amounts to is the dealer should be able to get you service parts that are still under warranty for a small shipping charge but the dealer will charge you the service call and the labor to replace the part. If in doubt contact Lennox and just ask for a copy of the warranty for your unit. Your manual that should have been left with your furnace when installed. Also note that a warranty certificate spelling out all the warranty stuff should have also been left with you at the job site but many do not do this since they do not want the customer to read it. Manual http://www.lennox.com/pdfs/manuals/L...1%20Manual.pdf Your warranty. Lennox Warranty | Complete Care Plus Lennox Extended Warranty | Lennox Residential |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My LENNOX Gas Furnace-High Efficiency G51MP Series is 2 years old. The furnace used to work perfectly. 4 Days ago I started having a problem with it. We woke up in the middle of the night and the house is very cold. The thermostat is set to 72°F and it was reading 66°F. The furnace was running but...
We recently purchaced a new home, it has a lennox furnace,which was servuce as part of our purchace agreement. I find that the fan run constantly when the unit is turned on. The oil burner in our other house, also a lennox does not. How can a wiring schematic be obtained?
To be clear, the furnace maintains the heating cycle until the target temperature is reached. Once it kicks off, it stays off until I go to the basement to reset it. It will not come on automatically once the temperature falls below the target setting. With these cold temperatures and a target...
Hi I need to know the furnce filtre size for a lennox pulse 21 furnace .ty
View more questions Search
|
