Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Armstrong ultra V tech 80
[ 0 Answers ]
When furnace comes on it does not reach desired temp.then cuts off a couple of minutes then reignites it repeats this cycle multiple times then finally cuts off,replaced control limit switch ran fine for about 1 1/2 weeks now its doing it again.any help would be appreciated
My armstrong ultra sx 80 furnace will not ignite. I have replaced the dirty filter,
[ 2 Answers ]
My armstrong ultra sx 80 furnace will not ignite. I have replaced the dirty filter, but the fan stay on all the time, without igniting the pilot. I have already checked out the rubber tube connected to the pressure switch/ combustion area. There is no rust or clog, and when I blow in the tube I...
Armstrong Ultra V Tech 80 furnace troubleshooting
[ 0 Answers ]
My armstrong Ultra V Tech 80 furnace suddenly doesn't want to ignite. Please bear with me as I don't know a whole lot about furnaces. I can hear and see the gas come on, but it does not ignite. I can hear a clicking noise I assume is the ignitor trying to engage, but the furnace doesn't start. It...
Armstrong Ultra V Tech 80 Filter change
[ 3 Answers ]
Where is the filter located for an Armstrong Ultra V Tech 80 furnace? How often should it be changed? This is a forced hot air system. Also has central air. Can they be purchased locally ie: Home Depot or Lowe's? Tha nk you.
Adding a Humidifier to a Armstrong Air Ultra V Tech 80
[ 1 Answers ]
I am installing an Aprilaire Humidifier 500a on an Armstrong Air Ultra V Tech 80 furnace. Where do I get the 24 VAC from the heating side of the furnace to feed the humidifier control? View more questions Search
|