Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Stub out to tailpiece drain connection
[ 1 Answers ]
I am in the process of replacing a bathtub on a slab in a one story house. The cutout and stub is already there. I removed the old PVC fittings and lead in the stub out. The connection dimensions for the new tub drain are a little different from the old tub. What kind of PVC fitting do I put in...
Leak in Shower Tailpiece
[ 3 Answers ]
Hello Speedball, I registered with Ask Me, just to ask you. My shower drain has been leaking Down into my crawlspace below my house, possibly for years. I crawled in the Mud down there to see if the nut needed tightening (nope), and it seems that the Water comes out of one side only of the...
New faucet drain tailpiece does not align with existing pipes
[ 1 Answers ]
I simply installed a new faucet & drain pipe for my existing bathroom sink, but now the drain tailpiece does not align with the existing pipes. This doesn't make sense to me, since the drain tailpiece is a straight pipe, but whatever. Do I have to replace the trap, etc. now to make everything...
Removing a tailpiece from lead solder
[ 1 Answers ]
How to remove the tailpiece on the p trap that is soldered in place with lead at the face of the wall
Kitchen Sink faucet - odd nut
[ 2 Answers ]
Hi, I'm new at this so figure I'll just jump right in and be ignorant... We have a kitchen sink faucet (American Standard I think) that seems to have a retaining nut under it that defies logic. I've replaced the faucet, drain, etc in the bathrooms and it was nothing like this. This kitchen... View more questions Search
|