Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Overhead light won't turn off
[ 4 Answers ]
We just replaced a dining room hanging light with a new fixture. There are 2 light switches that control this overhead light. When we turned the power back on the light came on but now we can not shut it off with either switch. What did we do wrong?
Overhead light installation
[ 2 Answers ]
I'm trying to install a new overhead light in the front entry way of our apartment. There are two positive and two negative. Wires coming out from the ceiling along with a red ground. I'm assuming this was intended for a light and fan to be connected seperatley. My problem is the only way I can get...
Decorative Swith Plate or Wall Plate and Switches
[ 5 Answers ]
We're looking to replace our standard switch plates with "decorative" plates, mainly in the kitchen backsplash. We have seen plenty of options for the plates, from pewter to copper to nickel, etc. Are there options for the actual switches themselves? Can we get switches, such as simple light...
Installing a pull chain light swith on ceiling fan
[ 1 Answers ]
The light pull chain broke in a ceiling fan so I bought a new whon need help wiring it in my grandmother forgot how they went back together, there's two wires running out of the light cluster(green)&(white). There two wires running out of the cieliing fan(green)&(white)also. But the new pull chain...
Trying to change a single pole light switch to a single pole swith with a light below
[ 5 Answers ]
I have a kitchen light and a basement light that are together in one electrical box, but are on single switches. I purchased a "single pole switch and pilot light" combination so I could see easily if the basement light is on. In the box there is a black, red and white wire. For the single pole... View more questions Search
|