Ask Experts Questions for FREE Help !
Ask
    kurtis_sanford's Avatar
    kurtis_sanford Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 23, 2007, 10:50 PM
    Installing a pull chain light swith on ceiling fan
    The light pull chain broke in a ceiling fan so I bought a new whon need help wiring it in my grandmother forgot how they went back together, there's two wires running out of the light cluster(green)&(white). There two wires running out of the cieliing fan(green)&(white)also. But the new pull chain swith has two black wires running out it. Does anybody no how it hookes up. NEED HELP!! :(
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Dec 23, 2007, 11:21 PM
    You connect it to the same two wires as the old switch.

    Ceiling fan pull chain replacement and repair - Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

New pull chain switch for ceiling fan light [ 14 Answers ]

Hello, I just purchased a new pull chain switch for my ceiling fan light. The lead wires coming down are white and blue. The wires on the new switch are black, blue and red. Normally these are simple installs but I need help on how to wire these due to the different colors. Thanks!

Ceiling fan light pull chain replacement [ 5 Answers ]

Pull chain on the ceiling fan light broke off, so I pulled it down, and figured out what to buy, but at some point one of the two black wires going to it came loose, presumably out of a screw cap. Does it just go in the cap with the other black load wires (3 still together)? Do I understand...

Pull chain switch on ceiling fan w/light [ 1 Answers ]

At one time a manufacturer made a helper lever to turn on a light on this kind of light but cannot seem to find it. It fitted right on the switch with an extension so it could be pulled on and would retract into the swith with out hanging up. Anyone lknow of this ltype of helper?

Repairing a ceiling fan light pull chain [ 1 Answers ]

Hello all I need to replace the pull switch for the light for my ceiling fan. I have the part and took off the the cover to get at the part that holds the bulb where the wires are supposed to connect. The problem is that one of the old wires is no longer connected and I can't tell where I should...

Installing a pull chain switch on a ceiling fan [ 2 Answers ]

I just replaced the broken pull chain switch on a ceiling fan. There were two black wires coming from above the light socket. Either way I attached them to the two black wires coming from the pull switch worked. Does it matter which goes to which if they work either way?

View more questions Search