 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hello. I have a Bryant plus 90 furnace
Hello. I have a Bryant plus 90 furnace. Approx 8 years old. It will run for about 5 minutes then stop before reaching desired temp. Then it will try to start up again but shut down before ignition. Flipping power on and off will make it work again. I cleaned the flame sensor with no change. It appeard to be clean.
|
||||
Check out some similar questions!
I have a Bryant Model 398A, Deluxe gas-fired condensing furnace, vintage 1987. The unit performs well but recently I noticed a raw propane smell outside my home which is coming from the furnace exterior discharge vent (3 in. PVC pipe). A repairman found and corrected a couple of minor gas leaks...
My Bryant furnace doesn't do anything. The indicator light on the control board is on all the time, no fault code. New t-stat, new ignitor have followed all instructions inside panel. Does not fire. Model # 312JAV036070
I have a 2007 Bryant Plus 90t Furnace and since it was installed 1n 2007 the Flame Sensor had to be cleaned 3 times, what's the problem why does the flam sensor get corroded and the furnace won't light.
I have a bryant from 1991. When I turn up heat the fan starts then ignitor starts, lights pilot and will run like that for about 5mins then shuts down and won't try to relight until I reset the power. When the pilot lights the flame is kind of weak. The blower is blowing it hard and it will...
Hi Experts, Can you guys please give me hand? Here's my problem, I have Bryant Furnace Plus 80, it's about 8yrs old. It worked so great until last week, the digital thermostat went dead, it didn't show any numbers on the screen, I thought maybe it's dead, so I went to the store and bought a new...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
