Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Installing pop up drain in new vessel sink
[ 4 Answers ]
I am refurbishing my bathroom and installing a vessel sink. It came with the drain, a pop up drain, but it did not come with the instructions for installing this drain. It appears simple enough, but I do not want to install it incorrectly and experience any leaking around the vainity top I made...
I can't remove pop-up stopper from sink
[ 11 Answers ]
I just replaced my bathroom centerset faucet and all went well... until it came to replacing the pop up stopper apparatus. I could loosen the nut that holds the apparatus securely to the sink, but I can't remove the apparatus entirely. As you can see from the pictures, the old apparatus is made...
Installing plumbing stopper
[ 1 Answers ]
I am having a problem with reinstalling stopper on a vanity sink, It is an old sink that has a pivot rod centered in middle of drain pipe
Installing new pop up drain in bathroom sink
[ 2 Answers ]
We are installing new pop up drains (the kind you push down on to close and open) on new sinks without overflow. The drain part sticks up about an eighth of an inch from the sink so after it drains there is always a little pool of water around the drain. The drain came with two rubber washers, one...
Lavatory pop up stopper
[ 2 Answers ]
I had a new large Kohler sink installed in the bathroom. The pop up stopper can be twisted and pulled out. I've got the pivot rod piercing the eyelet of the stopper and I've tightened the retaining nut, but with minimal twist, the stopper just comes out of the drain. I would think that the pivot... View more questions Search
|