Ask Experts Questions for FREE Help !
Ask
    cynthia656's Avatar
    cynthia656 Posts: 12, Reputation: 1
    New Member
    		  
    #1

    Jan 17, 2010, 05:09 PM
    Briggs and stratton wiring
    I need to completely rewire a 15.5 briggs( 28N707). Start, run and kill is all I need.

    I have a 2 pole toggle switch and a 2 pole push button. Need basics only.

    Building a home made tractor.

    Thanks, Confussed in La.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jan 17, 2010, 06:54 PM

    Hi,
    It would be fairly simple. The toggle would be used for the ignition and would involve the switch having the frame ground on one side and the ignition ground on the other (the problem being that Off is On and On is Off.)
    The push button is a bit more problematic in that, unless it is a high current switch, you will still need a solenoid (which is) to be triggered by it. Any three terminal solenoid will work with the battery hooked to one side and the cable to the starter to the other. At the battery side run a wire to one side of the push button switch and the other side goes to the small switching terminal of the solenoid. That pretty much does it!
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring Connection on a Briggs and Stratton [ 2 Answers ]

I am trying to connect the wires on a ridding mower. The engine is from the 80's and the mower is from the year 2000. The problem is the mower frame has 1 wire going to the alternator and one to the armature. The engine I am trying to connect has a two wire harness from the alternator and one...

17.5 ohv Briggs and Stratton wiring ( need diagram ) [ 1 Answers ]

I have a 17.5 ohv briggs and stratton that I am putting on a racer and need a wiring diagram so I can make it work from the factorty switch. I want to by pass all the safety wiring if possible. I just need to find a wiring diagram so I can get it wired up. I need to know if someone can help me or...

Briggs and stratton wiring diagram [ 6 Answers ]

I have an 11 hp briggs and stratton motor, model# 252707 type# 0622-02 code# 87121911 that I am having to rewire completely. I have everything figured out except the lights and the charging system. I have 2 black wires coming out of the alternator one has more volts than the other but both are...

Selinoid wiring for 14.5 briggs & stratton [ 3 Answers ]

Hi I need the wiring diagram for the solenoid on a briggs 14.5 murry mower can anyone help thanks Bruce

Wiring in 5 hp briggs and stratton [ 1 Answers ]

My problem is the wiring. When I took the ON and OFF switch wire off the magneto I would get a spark. When it was on I wouldn't. So what can I do to fix that. Is it just replacing the wires or what. Thanks.

View more questions Search