Ask Experts Questions for FREE Help !
Ask
    swatford's Avatar
    swatford Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jan 12, 2010, 11:09 PM
    Cam Stat limit control - very old furnace
    I have searched to the end of the internet.
    Can anyone point me in the direction of a L59-1.25B-180-30?
    Everything I have found so far is either 3" or 7" in length.
    Thanks for your help.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 13, 2010, 04:13 AM
    Call them for a replacement number

    A-1 Components, LLC. (800) 759-2872
    swatford's Avatar
    swatford Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Jan 14, 2010, 02:46 PM

    Thanks - I spoke to them, but no luck in finding this particular part. Looks like it is just too old.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Jan 14, 2010, 03:41 PM
    I am sure something can be substituted. You will need to look around some more.
    swatford's Avatar
    swatford Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Feb 4, 2010, 05:58 PM

    No luck yet.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #6

    Feb 4, 2010, 07:03 PM
    You might not find it and have to substitute something else.
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #7

    Feb 4, 2010, 07:25 PM

    Can you take a picture of this part ( out of furnace and on a piece of white paper so we can see it. I think then we could tell you a part that would work.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Old lennox with standing pilot and cam stat cycling [ 8 Answers ]

Hi gents Old lennox model 9803-980-2 H.boy 68000 BTU with a honeywell fan limit cycling every 5minutes . The wires disconnected at the Stat and jumpered . Still the furnace acting same problem . The motor and blower wheel and pilot acting quite normal . Do you think the fan limit is faulty...

To replace A Cam Stat Fan limit with a Honeywell [ 8 Answers ]

Hi guys, Am going to replace the current Cam Stat Fan limit on my old furnace coleman with a honey well 8 ". Could you specify the diagram for wiring on honeywell. Thanks for your prompt answers

Heil Furnace Cam-Stat [ 3 Answers ]

Hi--Ievery 6 months the cam-stat goes and has to be replaced. Furnace just blows cold air. We're on a maintenance program, so the gas company comes and just replaces the part (8 times so far!! ). Is this a chronic problem with these furnaces. Has anyone experienced this and how can it be fixed?...

Wiring T-stat to control heat lamp [ 14 Answers ]

I would like to heat an area (128cf with no moving air) using a 1500W heat lamp(s). I would also like to control the temp. inside this space with a standard home T-stat. mounted inside the area being heated. I understand the T-stat uses 24v while the heat source is 120v. I would also like to add a...

View more questions Search