Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hampton bay ceiling fan lights & fan not operating
[ 17 Answers ]
Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...
Hampton Bay Remote Ceiling Fan - light works - no fan
[ 2 Answers ]
After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...
Adding remote control to Hampton Bay Edgemont ceiling fan
[ 7 Answers ]
I recently purchased a Hampton Bay "Edgemont" ceiling fan with LED light kit. The box clearly states that the fan is set up for a remote control add-on (non-dimable). But the fan doesn't work at all with the remote unit. The light works fine when pressing the light control on the remote, but when...
Taking a Hampton Bay Ceiling Fan off the ceiling
[ 2 Answers ]
Can you tell me how to remove my ceiling fan off the ceiling. I don't know how to get the cone-shaped piece that is touching the ceiling off. Thank you.
Hampton Bay Ceiling fan: fan speed pull chain
[ 2 Answers ]
The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it? View more questions Search
|