 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My york 90 diamond blows warm and then cold and fills with water
My york 90 diamond furnace blows hot air and then cold air.And there is a hose connected to the blower motor that fills with water.I empty the water and it works for a little bit.And goes back to cold again with water in the same hose.What causes that and how do I fix the problem?
|
||||
Check out some similar questions!
Hi All... Hopefully uou can help me out... I have a york diamond 80 gas furnace. It was working fine up until a few days ago.. It began to blow out cold air when the house clearly was not even close to "requested" temp. It turns on, starts the initial motor, the humidifer also kicks...
All, Here is what my furnace is doing. I turn the heat on and watch it turn on. The fusable link (I think that's what it is) glows red and the burners fire up. Hot air then gets pushed. However, out of the blue, the burners shut down but the furnace keeps blowing air (cool). Where do I...
I have central heat/air in my rental house. My heater is gas, not electric. My furnace has been said to be running fine but for some reason the air coming out the vents is not hot. The vents closer to the furnace (which is in the garage) produces luke warm air, but as you get farther from the...
Our heater blows warm air out as it is supposed to, but also blows cold air out of the cold air return vents. Any idea on how to fix this short of replacing the system?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
