Ask Experts Questions for FREE Help !
Ask
    hakisfree's Avatar
    hakisfree Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 10, 2010, 09:57 AM
    Bryant 310aav0360
    I think my communication bord is out in my furnace.(Bryant 310AAV0360) How much do they run? My heat would come on for no more than a minute and then it would shut off.
    hakisfree's Avatar
    hakisfree Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jan 10, 2010, 10:00 AM
    Bryant 310aav0360
    I think my communication board is out in my furnace. How much do they run?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #3

    Jan 10, 2010, 12:41 PM
    Do a Google search but expect to pay between 150.00 and 200.00.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant furnace [ 1 Answers ]

I have a bryant from 1991. When I turn up heat the fan starts then ignitor starts, lights pilot and will run like that for about 5mins then shuts down and won't try to relight until I reset the power. When the pilot lights the flame is kind of weak. The blower is blowing it hard and it will...

I need to find furnace filter in Bryant Mod. 310AAV0360, [ 2 Answers ]

This unit is in my attic in a horizontal position with the vent in the upper left hand corner as you look at the unit with the cover off. Does my blower motor and filter lie at the opposite end?

Replace 9 yr. Old Bryant? [ 5 Answers ]

I purchased a Bryant +90 in Dec. of 2000. Since then they have replaced the inducer 3 times, the igniter once, and made other service calls for problems (all under 5 yr warranty). At least 3 times this winter/spring I have called them because the furnace fails to come on. Of course there's always...

Bryant Burner [ 3 Answers ]

I have a valve on a Bryant Burner for an old gas furnace. There seems to be a problem with the gas valve that feeds the burner. Are 40 year old valves available? Thank you. Dennis

View more questions Search