Blower motor speed

bribridg Posts: 1, Reputation: 1

New Member

Jan 10, 2010, 10:57 AM

Blower motor speed

How much does blower wheel size matter

hvac1000 Posts: 14,540, Reputation: 435

Heating & Air Conditioning Expert

Jan 10, 2010, 12:32 PM

Like anything else the bigger the better.

Add your answer here.

Check out some similar questions!

2 peed blower motor to single speed [ 1 Answers ]

I replaced my furnace blower motor which was a single speed 1750 rpm GE motor with a 2 speed GE motor. How do I get it to run as a single speed motor at the higher rpm (1140/1750)?

Blower motor speed on fireplace insert [ 1 Answers ]

I have a blower motor on my fireplace insert that only blows on one speed. I would like to know what I need to do to make this 2 speeds. High and low. Thanks.

Wiring a 2 speed blower motor [ 1 Answers ]

I scavenged a working motor from our old furnace a/c unit and recently installed it (and ductwork) in my basement to draw excess hot air from around our fireplace insert on the main level. Unfortunately the motor only seems to be blowing in the a/c mode which is much too fast even for pulling hot...

Blower motor only runs in low speed [ 1 Answers ]

Im running my air conditioning and my blower motor is only running in low speed. I have a american standard furnace model no. ud080c936j I came home from work and the house was hot so I went to turn on the air but it was already on. So I went down to check the furnace and the blower wasn't...

High Speed Blower motor [ 4 Answers ]

I have a Pulse 21 gas single zone forced air furnace. The blower motor is supposed to have 3 speeds. Right now everything works but when I turn on my AC the blower uses the same speed that it does for heat. Could there be something wrong or do I just need to rewire something?