Ask Experts Questions for FREE Help !
Ask
    rsgoin35's Avatar
    rsgoin35 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 22, 2008, 07:53 AM
    Blower motor speed on fireplace insert
    I have a blower motor on my fireplace insert that only blows on one speed. I would like to know what I need to do to make this 2 speeds. High and low. Thanks.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Nov 30, 2008, 02:19 AM
    Usually you will need to buy a 2 speed motor and a switch.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring a 2 speed blower motor [ 1 Answers ]

I scavenged a working motor from our old furnace a/c unit and recently installed it (and ductwork) in my basement to draw excess hot air from around our fireplace insert on the main level. Unfortunately the motor only seems to be blowing in the a/c mode which is much too fast even for pulling hot...

Motor for fireplace blower [ 2 Answers ]

I have an old (~15 yrs I guess) fireplace blower system made by Diamond W Products. The blower motor burned out and I'm trying to find an equivalent replacement. Talked to Diamond W and they discontinued this product line 6 yrs ago (yes, due to problems with the motor). The motor is rated as: ...

Blower motor only runs in low speed [ 1 Answers ]

Im running my air conditioning and my blower motor is only running in low speed. I have a american standard furnace model no. ud080c936j I came home from work and the house was hot so I went to turn on the air but it was already on. So I went down to check the furnace and the blower wasn't...

Can blower motor speed be adjusted on a Day and Night furnace ? [ 1 Answers ]

I have a Day and Night up flow furnace, about 13 years old. Can the blower motor speed be adjusted to a slower speed ? There is only 8 feet of duct and the noise coming out of the registers is very loud. Model # 395CAV036055 66,000 BTU Blower # 511, 1/3 hp If no one has any info, does...

High Speed Blower motor [ 4 Answers ]

I have a Pulse 21 gas single zone forced air furnace. The blower motor is supposed to have 3 speeds. Right now everything works but when I turn on my AC the blower uses the same speed that it does for heat. Could there be something wrong or do I just need to rewire something?

View more questions Search