Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Bathtub slow drain (used to drain OK!)
[ 15 Answers ]
First, Hello to everyone and thanks in advance for any help. My bathtub used to drain properly (I think.) but not fast IIRC. I've done some searching around the site and found a few good ideas. So according to some suggestions, I've done the following. Unscrewed and remove the overflow...
Tub drain center hole too big for strainer screw
[ 5 Answers ]
Hi all. I bought a fancy, "universal" shower drain strainer for my boyfriend's bathtub (which had no strainer). It came with a 1-3/4"-long screw, about 11/64" in diameter (I don't know anything about screw sizes so I held it side-by-side with some drill bits we had and it was the closest match :o )...
How do I replace my chrome bathtub drain with my new bronze drain?
[ 7 Answers ]
I just updated my bathtub/shower fixtures from chrome to oil rubbed bronze. The problem is the drain cover. I have what looks to be a simple kind where the drain plug screws into the drain hole. It's the chrome piece inside the tub that I want changed, the pipe itself drains fine. The...
Bathtub drain plug screw
[ 9 Answers ]
I am trying to remove the drain plug from my bathtub to make it easier to unclog. I have removed the top cap of the plug to expose a screw. I cannot get this screw loose. Is there a trick?
Adjusting bathtub drain linkage
[ 2 Answers ]
My problem is that the water continues to run out of the tub when the drain is closed. I have attempted to adjust the linkage, however I can't stop it from running out. I feel I amy not be adjusting it properly. Can you help? View more questions Search
|