Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Changed out radiator w/copper supply baseboard w/ pex supply
[ 2 Answers ]
And there is no heat in eminating from this baseboard. This was done in one room only and off the original radiator line.the system is all hotwater radiator w/the exception of this one room. We did not change the original heating supply line to this but added valves and then the pex. Seems the hot...
F1 OPT to H1 - Changed companies, Changed States
[ 1 Answers ]
Hi, My situation is as follows: OPT with company 1 in Texas from Dec 10 2006 - September 30 2007 H1 with company 1 in Texas from Oct 1 2007 - Nov 15 2007 H1 with company 2 in Maryland from Nov 15 2007 till date. What tax forms do I fill? I also have state tax from company 2 since that...
Changed valve on Hotwater tank leads to low flow
[ 1 Answers ]
I have a 40 Gallon Natural GAZ "GIANT" hot water tank. The Cold water in valve was leaking so I changed the piece. I made sure that the everything was clear and clean and that the valve was a BI-Directional flow. The tubes are PEC and I crimped the O-rings into place and they are a GO. ...
Antifreeze
[ 1 Answers ]
I want to know where does the antifreeze go in a 95 ford escort?
Antifreeze
[ 9 Answers ]
I have a 2000 Chevy Venture. GM says to use Dexcool antifreeze. Is this really necessary and why? Thanks. View more questions Search
|