Ask Experts Questions for FREE Help !
Ask
    pdfoster's Avatar
    pdfoster Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 30, 2009, 12:54 PM
    Janitrol gmnt 120-5
    I have been having problems with my furnace. Every year to year and a half, I have to replace the housing that holds the draft inducer motor to the furnace because it cracks. Is this a common problem for this furnace? It had to be installed upside down because it is replacing a boiler. Is there an updated part that might fix the problem?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Dec 30, 2009, 02:11 PM
    Maybe some photo`s would help us to understand,, what is upside down? The furnace or the inducer housing? If the furnace is a multi-directional furnace that shouldn`t matter.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What's the difference between a 120 volt and 120/208 volt system? [ 2 Answers ]

We offer our unit in a 120 or 277 volt version. A customer just told me he is using a "120/208" system. What does that mean and will our 120 volt rated product work with it?

Model gmnt-120-5 [ 1 Answers ]

The vent blower doesn't start each time the heat unit comes on. It hums if you hold down the cabinet safety switch and help the vent start by pushes the fins with a screw driver it starts and works for several days. But its down again so I'm calling a tech what is your oppinon on the problem? To...

Goodman GMNT Furnace Not Running [ 28 Answers ]

I have a Goodman GMNT High-efficiency Condensing Gas Furnace that is not coming on. It is 5+ years old and had been working fine until the last couple of days. Fortunately, weather is getting better (Spring!), so need for heat is low. It is a horizontal installation, located in the crawl space...

No HSI start GMNT Goodman Janitrol No flame start [ 1 Answers ]

I have a Janitrol (Goodman) furnace, and the controller board indicates 3 blinks. The flame blower starts, but it never gets to HSI (the ignitor never starts heating up). I've changed the controller board, and same issues. I've been through every sensor (bypassing all of them), and still no...

120/120 on top of breaker 120/75 on bottom [ 7 Answers ]

I had 120 on 1 leg and 120 on other leg on a panel I had 120 and 75 volts on bottem of breaker I changed panel box ,it worked great for about 3 weeks now its doing same thing what would be causing this thanks

View more questions Search